DIY

How to drill stainless steel？| Anthony’s Guide to Home DIY

by

How to drill stainless steel？| Anthony’s Guide to Home DIY

In this episode, I will use Diager 6.5mm metal drill bit with 5% cobalt to drill stainless steel. Let see how it perform!

How to drill stainless steel？| Anthony’s Guide to Home DIY – with Deco-man. Visit https://www.deco-man.com/ for more DIY, decorating and design ideas!!

How to drill stainless steel？

I had introduced metal drill bit in last episode

In this episode, I will use Diager 6.5mm metal drill bit with 5% cobalt to drill stainless steel

Let see how it perform!

When we drill metal, we need to have a puncher

Hammer, metal cutting oil, metal drill bit and of course a drill

First of all, we use puncher to punch a hole on stainless steel

Puncher is used to prevent dislocation during drilling metal

Secondly, adding cutting metal oil to prevent drill bit overheating

Thirdly, when drill and metal drill bit are ready

You can start drilling hole on stainless steel

Please remember to add cutting metal oil occasionally

This action can prevent metal drill bit from overheating

It is that easy to drill stainless steel

I will talk about concrete drill bit in next episode

What’s the difference between an impact drill and a hydraulic drill？| Anthony’s Guide to Home DIY

by
In this video, we will demonstrate how to drill into concrete. We will use an impact drill and a hydraulic drill to drill into concrete. What’s the difference between an impact drill and a hydraulic drill？| Anthony’s Guide to Home DIY – with Deco-man. Visit https://www.deco-man.com/ for more DIY, decorating and design ideas!!
————————————————————————————————————————————————————–

In the last video,

I showed you guys the different types of drill bits.

In this video, I will demonstrate how to drill into concrete.

I will use an impact drill and a hydraulic drill to drill into concrete.

As you can see, it is much slower to use an impact drill to drill into concrete compared to the hydraulic drill.

It took 45 seconds more to use impact drill to drill a hole into the concrete.

However, if you use a hydraulic drill,

It only took about 10-12 seconds

to drill a hole.

Let me give you a tip when using the impact drill.

You can start with a smaller drill bit.

And then use a bigger one, such as the 6.5mm or the 8mm drill bit

to make it easier to drill a hole.

Last tip to share.

When I start drilling, I will press the power button for several times.

To make a concave hole first,

And then drill into it to avoid displacement.

What can we do to prevent drill dust flying everywhere when drilling?

You can take it out the drill bit from time to time when drilling.

The move can prevent the dust

from bursting out at last.

This is the end of the demonstration.

See you next time!

 

How to fix the water seepage problem temporarily？｜Anthony’s Guide to Home DIY

by

How to fix the water seepage problem temporarily？｜Anthony’s Guide to Home DIY

In this video, we will share a method to fix the water seepage and leaking problems temporarily How to fix the water seepage problem temporarily？｜Anthony’s Guide to Home DIY – with Deco-man. Visit https://www.deco-man.com/ for more DIY, decorating and design ideas!!

How to fix the water seepage problem temporarily?

In this video, I will share a method to

fix the water seepage and leaking

problems temporarily.

If you tighten the Anti-Vac bottle trap too hard,

the bottle may break, and cracks will appear that leads to the water leakage.

In this situation, you can use the magic steel glue stick.

Rub it and take appropriate amount to fix the cracks.

In just 5 minutes, it will form the shape and will be hardened in one hour.

This magic steel glue stick can be applied in water,

Which is suitable for fixing the water leaking problem in pipes.

Let me show you how to do it.

Firstly, take out the appropriate amount of the magic steel glue stick.

Secondly, rub it completely.

When you loosen the pipe and the Anti-Vac bottle trap,

You will see a little crack here.

So, what to do now?

Cover the crack

with the rubbed magic steel glue stick.

Give a little pressure on it

To make it seal the crack completely.

After sealing it,

the magic steel glue stick will be hardened.

Then the water leakage problem is solved!

Fixing the cracks in water pipe or the Anti-Vac bottle trap is that easy!

Remember, the magic steel glue stick

takes one hour to harden completely.

Therefore, you need to wait at least one hour before using the pipe again.

The use of PTFE Tape｜Anthony’s Guide to Home DIY

by

The use of PTFE Tape｜Anthony’s Guide to Home DIY

Today, I will talk about the PTFE tape. What is it and when to use it? Let’s find out! The use of PTFE Tape｜Anthony’s Guide to Home DIY – with Deco-man. Visit https://www.deco-man.com/ for more DIY, decorating and design ideas!!

The use of PTFE Tape

In this video, I will keep sharing some useful tips for home renovation.

Today, I will talk about the PTFE tape.

What is it and when to use it?

Where do we usually see the PTFE tape?

You can see it in the hardware shop for sure.

But at home,

You may find it on the connect tap of the washing machine or the faucet in the bathroom.

Now, I will show you how to use the PTFE tape.

Let say this is a connect tap of the washing machine that is installed on wall.

Turn the water switch off and loosen the connect tap, then you will see the PTFE tape.

Firstly, you need to remove the old PTFE tape.

Remove all the old PTFE tape.

If you find it difficult to remove it,

you can use a cutter to remove the PTFE tape.

Give it a few cuts then you will be able to tear away all of the tape easily.

After removing the old PTFE tape, you will need cover it with new PTFE tape.

However, for some faucet that is in poor quality,

the adapting finish is unsmooth.

If you wipe it or twist it,

It may hurt your hands. You need to be careful with it.

This is the most common type of PTFE tape you can find on the market.

How do we use it?

Under normal circumstances, you will tear the tape in horizontal way.

But for PTFE tape, you will need turn it upside down.

Stick the tape on the faucet clockwise,

for about 20-30 rounds.

But it depends on the accessories that you are using.

Alright. Done. Tear it off.

You cannot install the faucet directly without
giving it a rub with your hands.

The faucet will look a bit puffy.

Then you can install the faucet to its original place now.

The PTFE tape will fill in the gap and there will be no more water leakage.

If you find there is water leakage

in the connecting faucet of the washing machine,

you can try this method to solve the problem.

 

Tools for Plastering wall｜Anthony’s Guide to Home DIY

by

In this episode, we will talk about the tools for plastering wall Tools for Plastering wall｜Anthony’s Guide to Home DIY – with Deco-man. Visit https://www.deco-man.com/ for more DIY, decorating and design ideas!!

Hi, thank you for watching Anthony’s Guide to Home DIY

In this episode, we will talk about the tools for plastering wall

You might notice that workers will have a plaster board and a trowel

This towel is used for plastering large area

However, don’t mixed up with this kind of towel

It is used when laying tiles

Also, workers always have a scraper with them

A scraper is used for plastering small area

You may find all these tools in local hardware store

In next episode, I will talk about material used when plastering walls

How to fix a sagging cabinet door | Anthony’s Guide to Home DIY

by

In this video, We will teach you how to fix a sagging cabinet door. How to fix a sagging cabinet door | Anthony’s Guide to Home DIY- with Deco-man. Visit https://www.deco-man.com/ for more DIY, decorating and design ideas!! Who forgot to close the cabinet door? Oh, why the cabinet door can’t be closed? In this … Read more

Is broad brush or paint brush better in painting the wall？ | Anthony’s Guide to Home DIY

by

In this video, We will discuss whether broad brush or paint brush is more suitable when applying latex paint. Is broad brush or paint brush better in painting the wall？ | Anthony’s Guide to Home DIY – with Deco-man. Visit https://www.deco-man.com/ for more DIY, decorating and design ideas!! In this video, I will talk about … Read more

How to apply brushing lacquer with a broad brush?｜Anthony’s Guide to Home DIY

by

In this video, We will show you how to apply brushing lacquer with a broad brush. brushing lacquer with a broad brush？｜Anthony’s Guide to Home DIY – with Deco-man. Visit https://www.deco-man.com/ for more DIY, decorating and design ideas!! In the last video, Mr. Lo showed us how to paint with a paint brush. In this … Read more

Is polyfibre roller sleeve or wool roller sleeve better in applying latex paint

by

Is polyfibre roller sleeve or wool roller sleeve better in applying latex paint Would you choose a polyfibre roller sleeve or wool roller sleeve to apply latex paint? Is polyfibre roller sleeve or wool roller sleeve better in applying latex paint｜Anthony’s Guide to Home DIY – with Deco-man. Visit https://www.deco-man.com/ for more DIY, decorating and … Read more

Why does the paint peel off again after plastering a wall？｜Anthony’s Guide to Home DIY

by

In this video, we are going to talk about the reason for the paint peel off again after plastering a wall Why does the paint peel off again after plastering a wall？｜Anthony’s Guide to Home DIY – with Deco-man. Visit https://www.deco-man.com/ for more DIY, decorating and design ideas!! ——————————————————————————————————————————————————————— Hi everyone, I am Simon. Today, … Read more